Are you frequently annoyed by sudden power outages in your place? Want to know how to connect generator to your house without transfer switch? If sudden power outages occur frequently at home, it is recommended to use a generator as a backup power source.
Tools Needed
Before you know how to connect generator to your house without transfer switch. Let’s take a look at what are tools needed :
- Double Outlet Receptacle Kit For Clean Electrical Connections
- Three Round Prongs And Wires For Connecting The Power Inlet Box To The Portable Generator
- Wattage Tester To Read The Wattage Of Portable Generators
You can use your old extensions, but you need to make sure the lines and end plugs are undamaged. The ideal length of the generator connection line is at least 25 feet. You can use whatever you need to connect your generator, but you also need a waterproof storage box.
This application uses a 3500 watt generator power and a 30 amp breaker with a 120 volt supply. This is only a backup in case of power failure, so I don’t need anything more powerful. You can also use a more powerful generator, but you’ll have to upgrade the electrical wiring needed to connect it.
Additionally, especially if you have a more comprehensive high voltage generator. It would be ideal to use an automatic transfer switch to connect the generator to your home.
A Step-By-Step Guide On How To Use A Generator To Your House Without Transfer Switch
Step 1: Create a port box site
Create locations for generator outlets wherever you like. To do this, use wood and drywall oscillators to create a rectangular opening where the outlet will fit in the wall. You can also use a drill if you have concrete walls.
Step 2: Drill a hole for the generator cable to go through the outlet
Use a drill to make holes for the wires to come through from outside the house. Make sure it is larger than the expected diameter of the wire. This will prevent the wires from being damaged when installed inside the outlet assembly.
Step 3: Install a waterproof box outside the wall
Install a waterproof box on the wall. This box is to protect the end stopper from potential damage. Any safety box such as the Sigma electrical box can be used to cover the final seal. However, you may need to find a larger safe that fits your wiring.
Step 4: Connect Wires to Outlets
To connect the wires to the outlet assembly, insert the other end of the wires into a socket outside your home. After inserting the lines, you can assemble the output assembly inside. Once the outlet and wires are assembled, the sealant can cover the outer and inner holes. This is necessary to isolate the installation.
Step 5: Plug the Alternator into the Socket and Test
To test this plug type connection, turn on the alternator, plug in the inlet plug, and connect the extension to the alternator inlet plug. Plug in a power consumption tester and install some equipment with a power rating compatible with your generator to read the wattage your alternator is producing.
Generators are valuable tools for keeping food fresh and customers of your house of rent are happy during winter power outages. Just get one on sale with enough wattage to run the appliances you need. And you’ll be ready for the cold winters.
